Filter
Top Products
31
3.7 Dump
Before removing the CF card from the recorder, it is necessary to press the Dump key to
transfer the measured data and events from the internal memory of the recorder to the CF card
3.8 Clear
When the internal memory is down to 25%, the mem icon on the top right changes color from
green to red. Also, when the internal memory reserved for events is down to 25 %, the evnt
( event ) icon on the top right changes color from green to red. In each case the user should
transfer all the measured data from the recorder to CF card by pressing Dump key as above.
However, if the measured data and events are not significant information, the user may also
press Clear key to clear them.
3.9 Operate
Press Operate key to start a job manually. For example: to record the alarm by selecting Log
alarm. There are various jobs that may be assigned, as described in Event, Job of 4.1
Channel.
Details about soft key Config are described in 4. Configuration.
3.10 Shutdown
Accidental turning off the power will cause loss of data and will interrupt the operation of the
recorder. Therefore press the Shutdown key to shutdown the system first before turning off the
power.