Filter
Top Products
5
6. When cleaning the recorder, handle carefully and use soft dry cloth. Avoid the use of
abrasives or any sharp and hard objects which would damage the display.
7. Do not operate the recorder if any part has been removed or disassembled. Consult your
nearest dealer at once.
Static Electricity
Appropriate precautions must be taken when handling the recorder. The circuit board,
components are susceptible to damage caused by electrostatic discharge. Take static electricity
precautions whilst handling and inserting Compact Flash Card into the recorder.
To replace the power-line fuse
The power-line fuse is located within the fuse-holder on the power board. For 90-250 VAD
line voltages, the user must use a 2.5A time-lag fuse, and for both 11-18 VDC and 18-36 VDC
line voltages, a 5.0A time-lag fuse must be used.