Filter
Top Products
106
6-1 Connecting to the PT
Before beginning transfer operations, connect the computer to the Program-
mable Terminal according to the system configuration shown below.
24-VDC power supply
5.25” floppy disk
3.5” floppy disk
IBM PC/AT
RS-232C
100 to 240 VAC
50 Hz/ 60 Hz
Note For instructions on the proper connecting cable, refer to the appropriate Pro-
grammable Terminal operation manual.
6-2 Transmitting Data
Data created with the Support Tool (i.e., screen data, memory table data, and
mark data) can be transmitted either by file or by screen (i.e., single screens,
multiple screens, or memory tables).
Transmitting Data Section 6-2