Filter
Top Products
120
5. The settings for transfer to the PROM writer will be displayed. Check
these settings before transferring the data.
6. After verifying that that PROM writer can receive the data, press the En-
ter Key. To cancel and return to step 3, press the Escape Key.
7. When the transmission is complete, the following message will be dis-
played and the Support Tool will wait for the data to be sent back from
the PROM writer. Transmit the data from the PROM writer.
8. If all of the data received matches the data that was transmitted, a mes-
sage will be displayed. To return to step 1, press any key.
7-4 Receiving Data from a PROM Writer
Data can be received from the PROM writer by file.
1, 2, 3...
1. Go to the File Selection Display.
2. Press F4 (ROM). The position of the bar cursor is irrelevant.
3. Select “Receive Data” and then press the Enter Key.
Receiving Data from a PROM Writer Section 7-4