Filter
Top Products
48
Note 1. Labels can be only one line long. Input character strings if longer labels
are required.
2. “@” will be input as the default label if the label setting is changed from
NO to YES.
Set the size and scale of the label display.
Position the label on the screen.
Deleting and Modifying You can delete or modify previously input touch switch data on the screen.
The procedures for these operations are the same as those for deleting and
modifying character strings. Refer to appropriate subsections of
2-1 Inputting
Character Strings
for details.
Note If you change the label designation from “No” to “Yes,” @ will be set as the
default.
2-5-2 Direct Connection Touch Switches
Creating Use the following procedure to create a direct connection touch switch.
1, 2, 3...
1. Select TOUCH SW from the Initial Edit Display, a list of the touch
switches already existing in the current screen will be displayed.
Touch Switches Section 2-5