Filter
Top Products
11
PROGRAMMING A MASTER POWER MACRO
(continued)
Clearing The Master Power Macro
1. Press and hold SET until theLED (red light)blinks twice,
then release
SET.
2. Enter
9 - 9 -5.The LEDwill blinktwice.Then pressPOWER
once.
3. Press and hold
SETuntil the LED blinks twice,then release
SET.The MasterPowerMacro is now cleared.
RE-ASSIGNING DEVICE KEYS
TheOneForAll 4Device Universal RemoteControlcanbe settocontrola
secondPVR,VCR,orDVD player.Forexample,to control aTV,a cablebox,
and
twoDVDplayers,re-assign theunused VCR/PVRkeytooperatethesecond
DVDplayer asfollows:
1. On theremote control,press and hold
SETuntil the LED
(red light) blinkstwice,then release SET.
2. Enter
9 - 9- 2.The LED will blinktwice.
3. Press
DVDonce.
4. Press
VCR/PVR once.The LED will blink twice.TheVCR/PVR
key isnowreadyto besetuptocontrol your second DVD
player.See
ProgrammingDeviceControlonpage 8.
Tore-assign asecondVCR orPVR (or DVR)to the unused
DVD key,repeat
steps 1through 4.However,in step3 substituteVCR/PVR forDVD,andin step4
substitute
DVD for VCR/PVR.NowtheDVD keywill be ready tobe set upas your
secondVCR or PVR(or DVR).See
ProgrammingDeviceControlonpage 8.
NOTE:Onlyonedevicecanbe assignedtoanunuseddevicekeyata time.
USING CHANNEL SCAN
Inthe CBL/SAT or TV mode,use the FAV key to start a 3-second scan of all
channels.Or,if programmed,use theFAVkey to scan only your favorite
channelsto view a desired channel(see
Programming FavoriteChannel Scan
on nextpage.)
1. Press
CBL/SATor TV once.
URC4021 manual new IC:CTGAE4P 4021 manual booklet New IC 4/13/09 3:38 PM Page 11