Filter
Top Products
5
Key Charts
WhentheLED(redlight) blinks,theremote control is
working and (after programming)is sending signals.
Press VCR/PVR,DVD,CBL/SAT,or TV once to selecta
desired home entertainment device to control.
Also see the Device Table on page 6.
Press POWER once to turn on oroff theselected device.
For master power control,see Programming
A Master Power Macro on page 10.
Use the keypad (1~ 9 and0) todirectlyselect channels
(e.g.,009 or 031).
UseTV/VIDtoswitchthe TV’sinput toviewTV orvideo
programs.
Press ENTER once after enteringthe channel numbers on
someTVs.
Use GUIDE to displayyour selected device’sprogram
guideor setup menu.
Press MENUonce to displayyourselected device’s main
menu.
Use INFOto display thecurrentchannel andprogram or
on-screen directory.
Use EXITto exit from your selected device’s guide or
menu.
Use the Cursor Keys to move the cursor in the program
guideand menu screens.
UseSELECT(OK)tochooseoptionsfromyourselected
device’s menuorguide.
Press LASTonce to recall the last channel.
UseFAV toscanallchannels,orafterprogramming,
to scanupto 10favorite channels.
Use CH▲ (or CH▼) to select the next higher (orlower)
channel.
PressSUBTITLE/CConcetodisplay (orturnoff)subtitlesor
closedcaptions,if availableonyourDVDplayeror
cable/satelliteservice.
For a PVR (orDVR),press PVR MENU once to display a
list of your recorded shows.
Press MUTEonce to turn thesound off or on.
Use VOL▲ (or VOL▼)to raise (or lower) the soundvol-
ume.
URC4021 manual new IC:CTGAE4P 4021 manual booklet New IC 4/13/09 3:38 PM Page 5