Filter
Top Products
LEARN
Like all sophisticated remote controls,MOSAIC includes a Learning feature so you can easily add a
function from another remote control,assign it to a special key,label that key,and place it on the
screen of your choice.
However,there are some considerations:
• Learning is allowed only for device function keys,not system keys.
• A learned key can replace an existing pre-defined key or a blank key.
• A learned key can be learned onto a soft or hard key.
NOTE: Although a learned key can be learned onto a hard key,it will interfere with the origi-
nal function of that key. Only make this choice when a hard key is not being used by a device
(e.g.,VOL keys for a CD Changer).
• A learned key will always be rectangular,even though the original version may be a different
shape.
• If desired,a learned key can be relabelled.
LEARNING A FUNCTION
1. On the Device Screen in the upper left corner,tap on Setup.You will see the main SETUP Menu
that greets you and asks,“What would you like to configure?”.
2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu.
NOTE: To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen, press down on ESC or MUTE for at least 2 seconds. For help,tap the ? key.
3. Tap on the LEARN key.You will see the LEARN Menu.
4. Tap on the LEARN key again.You will see the Device Selection Strip and MOSAIC asks you to
choose a device that will be taught.
LEARN
DELETE ALL
LEARN
Teach the remote a new
function.
Esc ?
Tap on
Which device?
LEARN
Esc
CBLTV VCR
22 www.oneforall.com