Filter
Top Products
HOME THEATER
Although you may think Home Theater is an independent device mode,it is actually a programmed
composite of the most-frequently-used home-theater functions taken from the devices configured in
MOSAIC.This composite screen is accessed via a dedicated soft key,labelled THEATER,at the top of
of all Device Screens.When it is tapped,MOSAIC will display your selected functions including any
related macros.
Home Theater also allows you to program a separate “Power On”macro that will power on all your
favorite home theater devices with the tap of a single key.
PROGRAMMING HOME THEATER DEVICES
1. On the Device Screen in the upper left corner,tap on Setup.You will see the main SETUP Menu
that greets you and asks,“What would you like to configure?”
2. Tap on the PERSONALIZATION key.You will see the PERSONALIZATION Menu.
NOTE: To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen, press down on ESC or MUTE for at least 2 seconds. For help,tap the ? key.
3. Tap on the HOME THEATER key.You will see seven device categories listed in the THEATER
SETUP Menu.
4. Tap on the Video Playback key.You will see the THEATER SETUP Device Selection Strip,as
shown on the next page.
5. Tap on the device you want to set up as your video playback device (e.g.,VCR).If you select a
device that has a transport (e.g.,VC R),necessary control keys will be added to the display.To
make a different selection,tap on the ESC key and repeat this step.
6. To save your selection,tap on the OK key. MOSAIC will return to the Theater Setup Screen.
7. Repeat steps 4 through 6 for all remaining device categories.When you’re finished,continue onto
the next section to program a Home Theater “Power On”macro.
NOTE: To return to a previous menu,tap on the ESC key.To return to last-displayed Device
Screen, press down on ESC or MUTE for at least 2 seconds.
MACROS
MOVE KEY
LEARN
LABEL KEYS
KEY MAGIC
VOLUME LOCK
VIEW/DELETE
HOME THEATER
PERSONALIZATION
Welcome to Personalization!
What feature
would you like to program?
Esc ?
Tap on
Video Playback
Audio Playback
Menu Source
Audio Source
Pro-Logic
Channel Source
PIP
NEW
THEATER SETUP
Configure the remote control
to match your Home Theater.
What device is used for:
Program Power Macro
Esc ?
Tap on
CLEAR
THEATER SETUP
Which device you use for
Video Playback.
Esc
CBLTV VCR
Tap on
device
(e.g.,VCR).
www.oneforall.com 33