Onkyo BD-SP808 DVD Player User Manual


 
27
EN
BASIC PLAYBACK
Compatible Cards:
- SD Memory Card (8MB - 2GB)
- SDHC Memory Card (4GB - 8GB)
- miniSD Card (8MB - 2GB)
- microSD Card (8MB - 2GB)
• For miniSD Card and microSD Card, the adapter will
be required.
Note
• The “Media Select” screen will disappear under the
conditions listed below:
- when [RETURN] is pressed.
- when the setup menu is called up.
• Do not remove the card during its playback.
• This unit supports SD Memory Card with
FAT12 / FAT16 file system, and SDHC Memory Card
with FAT32 file system.
• Do not delete the folders or files in the SD Memory
Card with your computer. This unit might not read
SD cards formatted on a computer.
• This unit recognizes up to 8 characters (including “~1”)
of file name in the SD Memory Card. Characters after
8th will not be displayed.
• If a folder or file name includes one of the following
unrecognizable characters, the folder or file name
may not be displayed correctly.
- Unrecognizable characters :
. , “ = + [ ] ; / \ : | ¥
• For an SD Memory Card, extension other than listed
below cannot be recognized.
- MP3: “.mp3”
- WMA: “.wma”
- JPEG: “.jpg”
“.jpeg“ is not available for SD Memory Card.
4
Use [K / L] to select “SD Card”, then
press [ENTER].
Quick
Disc
SD Card
Network
Mode Select
• This will set the unit to “SD Card” mode. To
play back the contents in any discs, exit “SD
Card” mode by selecting “Disc”.
5
Press [SETUP] to exit.
Even if you turn the unit to the standby mode in
“SD Card” mode, it will be in “Disc” mode the
next time you turn it on.
Reading an SD Memory Card
1
Insert an SD Memory Card, with the
label side facing up, into the SD
CARD slot until it clicks.
If no disc is in operation, “Media Select” screen
will appear on the TV screen.
BD-SP808BD-SP808
BLU-RAY DISC PLAYER
ON
/
STANDBY
C
DB
DDVD
STANDBY
SD CARD
B
D-
S
P
808
BD-SP808
BLU-
RAY
DISC
PLAYER
SD CARD
SD Memory Card
2
Use [K / L] to select “SD Card”, then
press [ENTER].
• Media filter screen will appear.
• When the SD Memory Card contains only one
type of file, skip to step 4.
3
Select the type of the file you want to
play back in the media filter screen.
Then press [ENTER] to display the file list.
• Playback of AVCHD files will start right after
you choose “Video”. (The file list is not available
for AVCHD files.)
4
Use [K / L] to select a desired track,
folder or file, then press [ENTER]. Use
[
s
/
B
] to go back and forward
between the hierarchies.
• If you press [ENTER] on the desired file,
playback will start.
To remove the SD Memory Card:
In stop mode, gently push in the SD Memory
Card, then pull it out slowly.