Filter
Top Products
37
EN
SPECIAL SETTINGS
Adjusting the Picture
BD-V
DVD-V
AVCHD
You can adjust the picture quality and store the setting you have adjusted on memory 1-5.
1 During playback, press [MODE] repeatedly to select "HD Picture Control" or
"SD Picture Control", then press [ENTER].
“HD Picture Control”:
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480p, 720p and 1080i) and HDMI OUT jack.
“SD Picture Control”:
Effective for the video signal of VIDEO OUTPUT (COMPONENT) jacks (480i), VIDEO OUTPUT (VIDEO) jack.
2 Use [K / L] to select a memory from “Memory 1” to “Memory 5” to store your setting,
then press [ENTER].
Memory1
3 Use [K / L] to select an item to be adjusted, then use [
{
/
B
] or [ENTER] to adjust the setting.
2. Brightness
15. Progressive Mode
1. Contrast
0
Auto
+1
sB
Item Adjustment range Description
Picture Control Setting
“HD Picture Control“ “SD Picture Control“
1. Contrast -7 to +7 (0*)
Adjusts the difference between the
bright and dark parts of the picture.
2. Brightness 0 to +15 (0*) Adjusts the brightness of the picture.
3. Sharpness -2 to +2 (0*) Adjusts the sharpness of the picture.
4. Gamma Correction -2 to +2 (0*)
Adjusts the dark positions of the
picture.
5. ICR Red 0 to +7 (0*) Adjusts the red color of the picture.
6. ICR Blue 0 to +7 (0*) Adjusts the blue color of the picture.
7. ICR Green 0 to +7 (0*) Adjusts the green color of the picture.
8. Color -7 to +7 (0*)
Adjusts the color density of the
picture.
9. Hue -7 to +7 (0*)
Adjusts the balance between the
green and red.
10. Black Level Adjusts the black level.
Off*, Middle, High Off, On*
11. Noise Reduction Off*, 1to 3
Reduces noise in the luminance signal
and chroma signal.
12. MPEG NR Off*, 1to 3
Reduces block noise and mosquito
noise.
13. Edge Enhancer Off*, Soft, Middle, Strong Emphasizes the edge of the picture.
14. Qdeo True Color Off*, Low, Middle, High
Adjusts the smoothness of the
picture. It is available for 10 or 12 bit
display.
15.
Progressive Mode Auto*, Video
Selects the setting of the progressive
scan.
* ) Default setting
*
1
) It may take several seconds to reflect the adjusted setting.
*
2
) For optimal video performance, THX recommends the following settings: “Black Level“ = “Off“.
Note
• The setting remains even you turn the unit into the standby mode except unplug the AC cord.
• ICR is the abbreviation of Intelligent Color Remapping.
• Qdeo True Color Processing (QTC) dynamically expands 8-bit video to use the full dynamic range offered by 10
and 12 bit displays, eliminating contours while preserving detail.
• Qdeo True Color is adjustable and effective when this unit is connected with the display device which is
compatible with Deep Color.
• If you press [MODE] during playing back Netflix / CinemaNow / Blockbuster, picture control setting will not appear
on the TV screen, but the selected setting is available. Please adjust the setting when another mode, then play
back Netflix / CinemaNow / Blockbuster.
*
1
*
1
*
2