35
EN
INTRODUCTION
PREPARATION
WATCHING TV
OPTIONAL SETTING
TROUBLESHOOTING
INFORMATION
English
Symptom Remedy
You switch to a different input
and the volume.
This unit will memorize the volume level from the last time you adjusted it.
I
f the v
olume of the sound from another device is higher or lower, then the loudness
will change.
•
•
You switch to a different input
and the scr
een size changes.
This unit will memorize the viewing mode from the last time you used the particular
input modes.
•
The display image does not
co
ver the entire screen.
If you are using the unit as a PC monitor, make sure that “Horizontal Position” and
“
V
ertical Position” in “PC Settings” are set correctly.
If you are watching TV or using the video, S-video, component video or HDMI with
480i input, press [SCREEN MODE
] repeatedly to switch various screen modes.
•
•
Captions are displayed as a
white bo
x.
No caption is displayed in the
Closed Caption-supported
program.
Interference from buildings or weather conditions may cause captioning to be
inc
omplet
e.
Broadcasting station may shorten the program to insert advertisement.
The closed caption decoder cannot read the information of the shortened program.
•
•
No caption is displayed when
pla
ying back a disc or a cassett
e
tape containing captions.
The disc or cassette tape may be illegally copied, or the caption signal might not have
been r
ead during c
opying.
•
Black box is displayed on the TV
screen.
The text mode is selected for caption. Select “CC1”, “CC2”, “CC3”, “CC4” or “Off”.
•
Note:
The LCD panel is manufactured to provide many years of useful life. Occasionally a few non active pixels may appear as a fixed point of
blue, green or red. This is not to be considered a defect in the LCD screen.
Some functions are not available in specific modes, but this is not a malfunction. Read the description in this manual for more details on
correct operations.
•
•