SP
17:40
CH2
STOP
ON SCREEN DISPLAY
To check the Counter, Clock and Channel number on the TV screen, press SEL. button on the remote control. Each
time you press SEL. button on the remote control, the TV screen will change as follows:
In the Counter mode, after 5 seconds,
only the counter remains. To clear it,
press SEL. button.
In the Clock mode, after 5 seconds,
only the clock and the channel number
remain. To clear them, press SEL.
button.
OFF mode Counter mode
Clock mode
After 5 seconds
Clock & Channel
remains
SPECIAL FEATURES
Magnetism from nearby appliances might affect the
colour of the TV picture.
If this happens, move this unit away from the appliance.
If the colour is still not correct, disconnect power cord
from AC outlet then reconnect it after 30 minutes.
When the end of a tape is reached during recording,
playback, or fast-forward, the tape will automatically
rewind to the beginning, power off and tape ejects.
This function is operative when Auto Repeat is set to
the [OFF] position.
The tape will not auto-rewind during timer recording
or One Touch Recording.
When the tape is rewound to the preset memory
position of the Counter Memory during Auto Rewind,
the tape will not eject and TV/VCR will not turn off.
DEGAUSSING
12
AUTO REWIND-EJECT
.
.
.
.
.
.
STOP
SP COUNT 0:12:34
COUNT 0:12:34
17:40
CH2
After 5 seconds
Counter
remains