Filter
Top Products
PRESET FOR USE
You can program the tuner to scan only the channels
you receive in your area. You must use the remote
control for the following steps.
1 Plug the TV/VCR power cord
Plug the TV/VCR power cord into a standard AC outlet.
Press POWER switch on the
back of the TV/VCR to
switch to "ON".
POWER
2 Turn on the TV/VCR
Press FUNCTION button to turn on the TV/VCR.
3 Select "CHANNEL SET UP"
Press MENU button repeatedly
to point to "CHANNEL SET
UP".
Then, press SEL. button.
4 Select "AUTO PRESET"
Press SEL. button.
The tuner scans and memories
all the active channels in your
area.
5 After scanning
The tuner stops on the lowest
memorised channel.
If you want to recall the selected
channels, you can select the
desired channel directly with the
remote control number button or CP or
TO RETURN TO TV MODE WHEN
SCANNING
Press MENU button in scanning mode.
The channels you no longer receive or seldom watch
can be deleted from the memory.
1 Select "CHANNEL SET UP"
Press MENU button repeatedly
to point to "CHANNEL SET
UP".
Then, press SEL. button.
2 Select "MANUAL PRESET"
Press MENU button to point to
"MANUAL PRESET".
Press SEL. button.
3 Enter the desired channel number
Press C/P or button repeatedly
until your desired channel
number is appeared. (You can
also use the number buttons to
enter it)
NOTES:
The bands are switched as follows by pressing
ADD/DELETE button. (Example: Now the
receiving band is VHFL) VHFL SKIP
When you will select the band, press MEMORY
button. The mode will change VHFL, VHFH, UHF.
4 Skip it from memory
Press ADD/DELETE button
repeatedly until the word "SKIP"
appears on the TV/VCR screen.
The channel is skipped from
memory.
To skip another channel, repeat steps [3] and [4].
5 Exit the channel setup mode
Press MENU button to returns to TV mode.
NOTES:
To confirm that channel(s) has been deleted, press
C/P or button.
Button selections for Manual Preset mode should be
done within 30 seconds, otherwise Manual Preset
mode will be out.
TO SKIP A PRESET CHANNEL
9
CHANNEL MEMORY PROGRAMMING
- AUTO PRESET
AUTO PRESET 1
- CHANNEL SET UP -
AUTO PRESET
MANUAL PRESET
-MENU-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER SET UP
ON
OFF
-MENU-
TIMER PROGRAMMING
PICTURE CONTROL
SETTING CLOCK
CHANNEL SET UP
USER SET UP
.
.
.
.
.
MANUAL SET UP
VHFL 2
MANUAL SET UP
VHFL 1
-CHANNEL SET UP-
AUTO PRESET
MANUAL SET UP