Filter
Top Products
Press C/P or button
repeatedly until your desired hour
is appeared. (Example: "19" for
19:30)
And press SEL. button
5. Set start minute
Press C/P or button repeatedly
until your desired minute is
appeared. (Example: "30" for
19:30)
And press SEL. button.
6. Set end hour
Press C/P or button repeatedly
until your desired hour is
appeared. (Example: "20" for
20:50)
And press SEL. button.
7. Set end minute
Press C/P or button repeatedly
until your desired minute is
appeared: (Example: "50" for
20:50)
And press SEL. button.
8 Set the channel number
Press C/P or button repeatedly
until your desired channel
number is appeared. (Example:
CH36)
And press SEL. button.
9. Set the tape speed
Press C/P or button repeatedly
until your desired tape
speed is appeared. (Example: LP)
10 Exit the program mode
Press SEL. button. Program 4 is now completed.
To set another program, repeat steps [1] to [10]
11 Set the timer
Press FUNCTION button to set automatic timer
recording. The REC indicator lights up.
You must turn off the TV/VCR to activate automatic.
timer recording.
If power is not turned off and you continue watching
TV, "TIMER REC STANDBY" starts flashing on
the TV screen 2 minutes before the programmed start
time.
While setting a program; press ADD/ DELETE
button to go back one step, and enter correct numbers
using C/P or button
After setting a program;
1) Press FUNCTION button.
2) Repeat steps [1] - [2].
3) Press SEL. button repeatedly (or press
ADD/DELETE button to go back one step)
until a digit you want to correct flashes and
make changes.
4) Press MENU button.
5) Repeat step [11].
TO CANCEL AN AUTOMATIC TIMER
RECORDING
While setting or after setting a program;
1) Press FUNCTION button.
2) Repeat steps [1] ~ [2] and select a program number
you want to cancel.
3) Press ADD/DELETE button.
4) Press MENU button to return to the TV mode.
While recording is in progress;
1) Press FUNCTION button.
2) Press STOP/EJECT button on the TV/VCR.
If you press FUNCTION button to turn off before the
end time, timer recording will continued. Repeat
steps [1] ~ [2] select a program number you want to
cancel and press ADD/DELETE button. Press
MENU button to return to the TV mode.
20
4. Set start hour
TO CORRECT A PROGRAM
PROGRAM NUMBER 4
DATE 05/06 MON
START TIME 10:30
END TIME -- --
CHANNEL - -
TAPE SPEED - -
PROGRAM NUMBER 4
DATE 05/06 MON
START TIME 10:30
END TIME -- --
CHANNEL - -
TAPE SPEED - -
PROGRAM NUMBER 4
DATE 05/06 MON
START TIME 10:30
END TIME 20 --
CHANNEL - -
TAPE SPEED - -
PROGRAM NUMBER 4
DATE 05/06 MON
START TIME 10:30
END TIME 20:30
CHANNEL - -
TAPE SPEED - -
PROGRAM NUMBER 4
DATE 05/06 MON
START TIME 10:30
END TIME 20:30
CHANNEL 36
TAPE SPEED - -
PROGRAM NUMBER 4
DATE 05/06 MON
START TIME 10:30
END TIME 20:30
CHANNEL 36
TAPE SPEED LP
.
.
.
.
.