PREPARATION FOR USE
VHF/UHF COMBINED ANTENNA
The VHF/UHF Rod Antenna (not supplied) is
detachable. Push the stem of the antenna into the hole
which is located on the upper back cabinet of the unit.
Connect the VHF/UHF Rod Antenna or VHF/UHF
Combination Antenna to the ANT. terminal of the
TV/VCR as shown in the diagram below.
For the best reception, extend the VHF/UHF Rod
Antenna fully and adjust its position. (Avoid handling
the top section when making adjustments.)
1) Open the battery compartment cover by pressing the
cover on the remote unit in the direction of the arrow.
2) Insert 2 "R6/AA/SUM-3" penlight batteries into the
battery compartment in the direction indicated by the
polarity (+/-) markings.
3) Replace the cover.
VHF/UHF Antenna
Rod Antenna
(Not supplied)
VHF/UHF SEPARATE ANTENNAS
In some areas it will be necessary to use an outdoor
antenna.
VHF Antenna
VHF/UHF
Combiner
(Not supplied)
UHF Antenna
When using an external input signal (another VCR or
camcorder), connect the player’s audio/video output
cables to the AUDIO/VIDEO
socket of your TV/VCR.
Then press CHANNEL or
button or enter "00" with
number button so that
"AUX" appears on the
screen.
CABLE CONNECTIONS
8
AUX
EXTERNAL INPUT MODE
INSTALLING THE BATTERIES