Filter
Top Products
SEARCH
Make sure . . .
You must use the remote control for the following steps.
Power must be turned on.
Insert a tape.
This feature can be used to memorise a beginning
point that you want to review. And you can search it
easily by rewinding or fast forwarding.
NOTE:
If the counter is not displayed, the Counter
Memory will not be activated. Press COUNTER
MEMORY button so that the counter appears on
the display.
1 Stop a tape at your desired point
Rewind or fast forward the tape to the beginning point
2 Reset the counter to 0:00:00
Press COUNTER RESET button.
3 Select the Counter Memory mode
Press COUNTER MEMORY
button so that "MEMORY"
appears on the display.
4 Begin recording or playback
Press REC or PLAY button.
Press STOP button when recording or playback is
completed.
5 To activate the Counter Memory
Press REW (or F.FWD) button. The tape will
automatically stop when the counter returns to 0:00:00
TO CANCEL THE COUNTER MEMORY
First, have the TV/VCR appear
on the counter of the TV screen,
then press COUNTER MEMORY
button so that "COUNT"
appears on the TV screen.
The Time Search function makes it possible to quickly
advance the tape to your desired position from any
position by entering the exact amount of playback time
of the part that you want to skip.
NOTES:
Time Search is set up to 9 hours 50 minutes (9:50)
by 10 minutes at a time.
This function is not operative in recording mode.
Counter Memory function is not operative in this
mode.
This function is not operative when a cassette tape is
not inserted in the TV/VCR.
In the example below: To watch a program after 2 hour
50 minutes from present position to forward direction.
1 Select "TIME SEARCH" mode
Press TIME SEARCH button
2 Enter your desired time
Press C/P or button
repeatedly until your desired time
is appeared. (Example: "2:50"
for 2 hours 50 minutes)
3 Begin Time Search
Press REW or F.FWD button. The tape will move to the
specified point.
The time counts down as the searching progresses.
When 0:00 is reached, the tape will start playback
automatically.
TO CANCEL THE TIME SEARCH
Press STOP button on the TV/VCR or the remote
control. This will delete the selected time.
16
COUNTER MEMORY
TIME SEARCH
MEMORY 0:00:00
COUNT 0:00:00
.
.
.
.
.
.
.
.
TIME SEARCH
2:50