Filter
Top Products
Setup menus
USER menu
<BASIC>
(continued)
Item
Setting
No.
Superimposed
Superimposed
Description
display
No.
display
009 CHARA
H-POS
010
CHARA
V-POS
011CHARA
TYPE
012SY
S
FORMAT
013
PB FORMAT
0000
0005
0012
525 mode
0000
0018
0022
625 mode
0000
0023
0028
0000
0001
0000
0001
0000
0001
0
This sets the position of the characters on the horizontal plane
for the time code and other super displays output to the
5
VIDEO OUT 3/SERIAL OUT 3 connector.
<Notes>
12
1. When setting this item, the DISPLAY SEL status is output
to VIDEO 3 even if SUPER OFF has been set. However,
when the menu is exited, operation complies with the
SUPER OFF/ON setting.
Also, CHARA TYPE is output to VIDEO 3 according to the
status set in the menu.
2. When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This sets the position of the characters on the vertical plane
0 for the time code and other super displays output to the
VIDEO OUT 3/SERIAL OUT 3 connector.
18
<Notes>
1. When setting this item, the DISPLAY SEL status is output
22
to VIDEO OUT 3/SERIAL OUT 3 even if SUPER OFF has
been set. However, when the menu is exited, operation
0
complies with the SUPER OFF/ON setting.
23
28
WHITE
W/OUT
422
411
MANUAL
AUTO
2.
When the DISPLAY SEL setting causes characters to
extend beyond the edges of the screen, the setting value is
changed so that the characters are automatically displayed
in a position on the screen.
This selects the display type for the super display output to the
VIDEO OUT 3/SERIAL OUT 3 connector as well as for dis-
plays such as the setting menu,. etc.
0: White characters against a black background.
1: White characters with a black border.
This sets the VTR
’
s recording and playback format.
0: This selects 422 (50M).
1: Selects 411 (25M).
<Note>
Editing is not possible in the 411 mode.
This selects the tape playback format.
0: Compliance with the setup menu No. 012 (SYS FORMAT)
setting.
1: Compliance with the format in which the tape was
recorded.
<Notes>
When an editing mode has been selected, the
“
MANUAL
setting is forcibly established for internal operations.
There is no automatic setting in the 525/625 mode.
The underline on the setting item denotes the initial setting.
-48
-
“