Filter
Top Products
Error messages
When a warning occurs in this unit, the warning lamp lights up.
Opening the DIAG menu will display the warning description on the counter display and the
monitor. Also, when an abnormal operation is detected in this unit, the AUTO OFF lamp lights
up and a message appears on the counter display.
DIAG menu
This display the VCR information.
VCR information includes “WARNING” information and “HOURS METER” (usage time)
information. A DIAG menu appears on the monitor when the monitor is connected to the
VIDEO OUT 3 connector on the connector section.
Displaying the DIAG menu
Press the DIAG button.
The DIAG menu screen is displayed on the monitor, and the message is displayed on
the counter display.
The “WARNING” information and “HOURS METER” information can be switched by
pressing the search buttons.
Press the DIAG button again to return to the original display.
2
1, 3
“WARNING” information display
A warning message is displayed whenever a warning occurs (the warning lamp lights up).
When warnings have not been detected, “NO WARNING” is displayed.
When multiple warning occur, the descriptions for each warning can be checked by turning
the search dial.
- 72 -