Panasonic AJ-PD950 VCR User Manual


 
USER menu
<VIDEO> (continued)
Item
Superimposed
No.
display
613
VIN SETUP
614
Pb/Pr OUT
LV
617 WFM SEL
Setting
Superimposed
No.
display
0000
THRU
0001
CUT
0000
M
0001
B-CAM
0000
CTL
0001
TC
0002
VIDEO
0003
SYNC
0004
RF-L
0005
RF-R
0006
ENV-L
0007
ENV-R
Description
This selects whether the composite signal is to be recorded
with setup or without setup.
0: When recording signals with no setup.
1: When recording signals with 7.5% setup.
<Notes>
This setup menu is not displayed in the 625 mode.
When recording composite signals, be sure to double-check
whether the signals are to be recorded with or without setup.
This selects the analog component output level.
0: MII level
1: - -CAM level
<Note>
This setup menu is not displayed in the 625 mode.
This selects the signal to output from the VIDEO OUT2
connector.
0: The CTL signal is output.
1: The TIME CODE signal is output.
2: The VIDEO OUT signal is output.
3: The SYNC signal is output.
4: The PB L RF signal is output.
5: The PB R RF signal is output.
6: The PB L ENV signal is output.
7: The PB R ENV signal is output.
The underline on the setting item denotes the initial setting.
-57-