Filter
Top Products
USER menu
<EDIT>
(continued)
Item
No.
Superimposed
display
308
EDIT
RPLCE4
309
EDIT
RPLCEC
310
CONFI
EDIT
311 AUD EDIT
IN
312
AUD EDIT
OUT
313
AUTO
ENTRY
314
CF ADJ
SEL
315
AFTER
CUE-UP
316
JOG RANGE
Setting
No.
Superimposed
display
0000
0001
0002
0003
0000
0001
0002
0003
000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
0000
0001
N-DEF
CH1
CH2
CH1+CH2
N-DEF
CH1
CH2
CH1+2
OFF
ON
CUT
FADE
CUT
FADE
DIS
ENA
PLAYER
This selects the CF adjustment deck with deck-to-deck
RECORD
editing.
0: The player’s edit IN/OUT points are adjusted. (reference as
STOP
STILL
–43~1
This sets the range of the JOG speed during 9P remote
–4~+4
operation.
Description
The same type of setting as No. 305. This selects the channel
concerned when the VTR CH4 edit preset is set in compliance
with the ON or OFF presetting for the analog audio signals
designated by the controller.
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with analog CH1 or CH2 edit preset.
This selects the channel concerned when the VTR CUE edit
preset is set in compliance with the ON or OFF presetting for
the analog audio signals designated by the editor or controller.’
0: Not set.
1: Compliance with analog CH1 edit preset.
2: Compliance with analog CH2 edit preset.
3: Compliance with either analog CH1 ot CH2 edit preset.
This selects whether to conduct simultaneous playback while
editing is in progress.
0: No simultaneous playback
1: Simultaneous playback
<Note>
Simultaneous playback is valid when the TAPE/EE switch is
set to TAPE.
This selects the connection method for the digital audio edit IN
point.
0: Cut processing
1: V Fade processing
This selects the connection method for the digital audio edit
OUT point.
0: Cut processing
1: V Fade processing
This selects whether the IN point is to be entered using the
PREROLL button when it has not been entered.
0: IN point is not entered.
1: IN point is entered.
the RECORDER side)
1: The recorder’s edit IN/OUT points are adjusted. (reference
as the PLAYER side)
This selects the mode after cue-up operation is complete.
0: STOP mode
1: SHTL STILL mode
0: Plays at -0.43 to +1 speed range
1: Plays at the ±4.1 speed range
The underline on the setting item denotes the initial setting.
-53-