Filter
Top Products
26
Loading the user defaults
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is set to the menu setting mode, and the
menu screen appears on the video monitor.
1
Press the RESET button.
The unit is now set to the default setting mode,
and the default setting screen now appears on
the video monitor.
2
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the LOAD
position, and press the SET button.
The unit is set to the LOAD mode, and the LOAD
screen appears on the video monitor.
3
SELECT MODE
2 0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
SET–UP MENU <LOAD>
2 NO
FACTORY
USER (ALL)
USER (NOT SYSTEM)
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the USER (ALL)
position, and press the SET button.
OWhen the cursor is moved to USER (NOT
SYSTEM) and this operation is performed,
everything except the SYSTEM menu settings
operates according to the user settings stored
in the memory.
OWhen the cursor is moved to NO and this
operation is performed, the display returns to
the menu screen without changing to the user
settings stored in the memory.
4
Set the LOCAL/MENU/REMOTE switch to the
LOCAL or REMOTE position.
This completes the menu setting procedure.
5
Menu protection
Set the LOCAL/MENU/REMOTE switch to the
MENU position.
The unit is set to the menu setting mode, and the
menu screen appears on the video monitor.
1
By setting the unit to the menu protection mode, the
setup menu can no longer be opened even when the
LOCAL/MENU/REMOTE switch is set to the MENU
position.
Press the RESET button.
The unit is now set to the default setting mode,
and the default setting screen now appears on
the video monitor.
2
3
SELECT MODE
2 0 ESCAPE
1 LOAD
2 SAVE
3 PROTECT
MENU PROTECT OK?
2 NO
YES
To initiate menu protection, press the MENU-
UP button or MENU-DOWN button to move
the cursor to the YES position, and press the
SET button.
The menu screen now appears.
4
Setup (initial settings)
Press the MENU-UP button or MENU-DOWN
button to move the cursor to the PROTECT
position, and press the SET button.
The unit is set to the menu protection setting
mode, and the screen prompting the user to
confirm the menu protection appears on the
video monitor.