Filter
Top Products
44
Setup menus
VIDEO
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings
“
” indicates the factory setting.
630
1080i>HD_OUT
0000
0001
1080i
720p
For selecting the HD output signal format during 1080i tape playback or in the
1080i EE mode.
0: 1080i
1: 720p
<Notes>
O This item’s setting cannot be changed while a tape is being recorded or while
the recording pause mode is established.
O When 720p is selected as this item’s setting, no signals are output from the DV
connector. If “1394” is selected as the menu item No.600 [VIDEO IN SEL]
setting, “HDSDI” is established as the VIDEO IN SEL setting.
632
720p>HD_OUT
0000
0001
1080i
720p
For selecting the HD output signal format during 720p tape playback or in the 720p
EE mode.
0: 1080i
1: 720p
<Notes>
O This item’s setting cannot be changed while a tape is being recorded or while
the recording pause mode is established.
O When 1080i is selected as this item’s setting, no signals are output from the DV
connector. If “1394” is selected as the menu item No.600 [VIDEO IN SEL]
setting, “HDSDI” is established as the VIDEO IN SEL setting.
680 CC (F1) BLANK
2DW
0000
0001
BLANK
THRU
For selecting ON or OFF for the closed caption signal in the first field.
0: Forced blanking
1: No blanking
681 CC (F2) BLANK
2DW
0000
0001
BLANK
THRU
For selecting ON or OFF for the closed caption signal in the second field.
0: Forced blanking
1: No blanking
684 EDH (SD)
2DW
0000
0001
OFF
ON
For setting whether to superimpose EDH onto the SD SDI output.
0: EDH is not superimposed.
1: EDH is superimposed.
685 ESR MODE (SD)
2DW
0000
0001
OFF
AUTO
For selecting the mode of the edge subcarrier reduction (ESR) operation in the
playback circuit.
0: ESR is forcibly turned off.
1: ESR is automatically set to ON or OFF depending on the unit’s operation.
634
480p>HD_OUT
0000
0001
1080i
720p
For selecting the HD output signal format during 480p tape (DVCPRO50P)
playback.
0: 1080i
1: 720p
636
480i>HD_OUT
0000
0001
1080i
720p
For selecting the HD output signal format during 480i tape (DVCPRO50, DVCPRO,
DV or DVCAM) playback.
0: 1080i
1: 720p
676 BLK CLIP
0000
0001
OFF
ON
For setting whether to clip what is below the pedestal level for the Y (luminance)
signal of VIDEO OUT and SD OUT.
0: What is below the pedestal level is not clipped.
1: What is below the pedestal level is clipped.
686 CCR MODE (SD)
2DW
0000
0001
OFF
AUTO
For selecting the cross color processing during playback.
0: The cross color is output as is.
1: The cross color can be reduced.
628 U/C ENH H
0000
0001
0dB
+1dB
For enhancing the horizontal outlines during up-conversion.
0: 0dB
1: +1dB
629 U/C ENH V
0000
0001
0dB
+1dB
For enhancing the vertical outlines during up-conversion.
0: 0dB
1: +1dB
<Note>
2DW
: With SD output (SD tape playback or down-converted output)