Filter
Top Products
31
SYSTEM
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings
“
” indicates the factory setting.
15 VO SYS H (SD) 0000
:
0864
:
1728
–864
:
0
:
864
For adjusting the system phase of the VIDEO output signals (in 37 ns increments).
–: The phase is advanced.
+: The phase is delayed.
<Note>
The setting range is –858 to 0 to 858 when 59/60 is selected as the menu item
No.25 [SYSTEM FREQ] setting.
16 SD SYS H (SD) 0000
:
0864
:
1728
–864
:
0
:
864
For adjusting the system phase of the SD SDI output signals (in 37 ns increments).
–: The phase is advanced.
+: The phase is delayed.
<Note>
The setting range is –858 to 0 to 858 when 59/60 is selected as the menu item
No.25 [SYSTEM FREQ] setting.
18 SCH COAR (SD) 0000
0001
0002
0003
0
90
180
270
For adjusting the SCH (sub-carrier to horizontal) phase of the VIDEO output
signals (4 positions in 90-degree increments).
The SC phase changes, and the H phase remains unchanged.
19 SCH FINE (SD) 0000
:
0032
:
0064
–32
:
0
:
32
For adjusting the SCH (sub-carrier to horizontal) phase of the VIDEO output
signals (variable range of over ±45 degrees).
The SC phase changes, and the H phase remains unchanged.
A range of ±180 degrees is covered by using this setting in combination with item
No.18 [SCH COAR(SD).
20 AV PHASE 0000
:
0100
:
0200
–100
:
0
:
100
For adjusting the phase of the AUDIO output signals in relation to the VIDEO
output signals (in 20.8 µs increments).
–: The phase of the audio output signals is advanced in relation to the video output
signals.
+: The phase of the audio output signals is delayed in relation to the video output
signals.
Setup menus
12 SYS H (HD) 0000
:
1320
:
2640
–1320
:
0
:
1320
For adjusting the system phase of the HD SDI output signals (in 13.5 ns
increments).
–: The phase is advanced.
+: The phase is delayed.
<Note>
The setting range is as follows:
O –1100 to 0 to 1100 when 59/60 is selected as the SYSTEM FREQ setting
O –1375 to 0 to 1375 when 23/24 is selected as the SYSTEM FREQ setting
14 SYS SC (SD) 0000
:
0108
:
0216
–108
:
0
:
108
For adjusting the system phase of the VIDEO output and SD SDI output signals
(total variable range of over ±180 degrees).
–: The phase is advanced.
+: The phase is delayed.