Filter
Top Products
47
770 MONITOR MIX
0000
0001
STEREO
CH1+2
For setting the audio monitor output sound.
(This functions when the audio monitor selector switch on the front panel is at the
ST position.)
0: The sound is output in stereo.
1: Mixed sound is output (to both the left and right connectors).
771 H.PHONE MIX
0000
0001
STEREO
CH1+2
For setting the headphone output sound.
(This functions when the audio monitor selector switch on the front panel is at the
ST position.)
0: The sound is output in stereo.
1: Mixed sound is output (when a monaural earphone is used).
Setup menus
AUDIO
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings
781 IN IMP SEL
0000
0001
600
HIGH
For setting the analog audio input impedance.
0: 600 Ω
1: High impedance
<Note>
Regardless of this setting, the impedance is set to 3 kΩ when –60 dB is selected
as the menu item No.701 to 704 [CH1-4 IN LV] settings.
780 AUD OUT SEL
0000
0001
0002
LINE
CH1/2
CH3/4
For setting the sound to be output from the analog audio output connectors.
0: All the output connectors are used as the main line output.
CH1 connector = CH1 sound
CH2 connector = CH2 sound
CH3 connector = CH3 sound
CH4 connector = CH4 sound
1: The CH1 and CH2 output connectors are used as the main line output, and the
CH3 and CH4 output connectors are used as the monitor output connectors.
CH1 connector = CH1 sound
CH2 connector = CH2 sound
CH3 connector = Monitor L (CH1, CH2, CH1+CH2) sound
CH4 connector = Monitor R (CH1, CH2, CH1+CH2) sound
2: The CH1 and CH2 output connectors are used as the main line output, and the
CH3 and CH4 output connectors are used as the monitor output connectors.
CH1 connector = CH3 sound
CH2 connector = CH4 sound
CH3 connector = Monitor L (CH3, CH4, CH3+CH4) sound
CH4 connector = Monitor R (CH3, CH4, CH3+CH4) sound
“
” indicates the factory setting.
A02 P.ON LOAD
0000
0001
OFF
ON
For setting whether to change the setup menu settings to the user initial settings
when the power is turned on.
0: The settings are not changed.
1: The settings are changed.
MENU
Item Setting
No.
Superimposed
display
No.
Superimposed
display
Description of settings