Filter
Top Products
54
[AUDIO]
$ Digital audio
Sampling frequency:
48 kHz (synchronized with video)
Quantizing:
16 bits
Frequency response:
20 Hz to 20 kHz ±1 dB (at reference level)
Dynamic range:
More than 85 dB (1 kHz, emphasis OFF)
Distortion:
Less than 0.1% (1 kHz, emphasis OFF,
reference level)
Crosstalk:
Less than –80 dB (1 kHz, between 2 channels)
Wow & flutter:
Below measurable limits
Headroom:
18 dB
$ Audio input connectors
21
Analog input (CH1, CH2, CH3, CH4):
XLR k4, 600 Ω/high impedance switchable
(default: 600 Ω)
+4/0/–20 dBm/–60 dBu switchable
(The impedance is set to 3 kΩ when –60 dB is
selected)
HD serial digital input:
BNC k1, 75 Ω,
Compliant with SMPTE 292M/296M/299M
standard
[OTHER CONNECTORS]
[OPTIONS]
Time code input
21
:
BNC k1, 0.5 to 8V [p-p], 10 kΩ
Time code output:
BNC k1, low impedance, 2.0 ±0.5 V [p-p]
(with 600 Ω load)
RS-422A input:
D-sub 9-pin, for AJ-A95
RS-422A interface
DC power output:
4 pins k1, DC 12 V, 250 mA, for AJ-A95
DV input/output connector:
Connector:
6-pin type
Transmission rate:
400 Mbps, 200 Mbps, 100 Mbps;selectable
Transmission data:
Compliant with IEEE 1394-1995
Compliant with IEC 61883-Part1, Part2
Control command:
Compliant with AV/C command set (General Ver
3.0, VCR Subunit Ver 2.01)
HD SDI input/output SD SDI output board:
AJ-YA120AG
Digital video input/output board:
AJ-YAD120AG
Specifications
$ Audio output connectors
Analog output (CH1, CH2, CH3, CH4):
XLR k4, low impedance
+4/0/–20 dBm (with 600 Ω load) switchable
Monitor output L or R switchable for CH3/CH4
output
HD serial digital output
21
:
BNC k2, 75 Ω
(compliant with SMPTE 292M/296M/299M
standard)
SD serial digital output
21
:
BNC k1, 75 Ω
(compliant with SMPTE 259M-C/272M-A, ITU-R
BT.656-4 standards)
Monitor output (L, R):
PHONO k2, 600 Ω, –8 dBv
Headphone output:
Stereo (6 mm diameter), 8 Ω, level variable
$ Video output adjustment ranges
HD serial digital output system phase
21
:
1080i: ±0.5H (in 13.5ns increments)
59/60 Hz: ±1100 samples
50 Hz: ±1320 samples
23/24 Hz: ±1375 samples
720p: ±0.5H (in 13.5ns increments)
59/60 Hz: ±825 samples
SD serial digital/composite video output system
phase
21
:
±0.5H (in 37ns increments)
59 Hz: ±858 samples
50 Hz: ±864 samples
Composite video output SC phase;
±180 deg. or more
21: This functions only when the AJ-YA120AG (optional
accessory) is installed.
22: This functions only when the AJ-YAD120AG (optional
accessory) is installed.
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.