Filter
Top Products
39
• Dynamic Recording is set to ALM-ONLY
When an alarm is received, it records the assigned camera input in a specified number of pre-recordings, and then
records the alarm images in a specified number of post-recordings.
Notes:
• The thumbnails are based on an image each time an alarm is received.
• The recording number is automatically assigned to the image.
■ One Shot Recording
The One Shot Recording is an event-recording function reacting to an alarm input when the recording timer is set to the inter-
nal timer [INT].
It records the number of particular images that have activated the alarm.
When the system is equipped with specified combination camera, it starts recording alarm images after the camera moves to
the specified preset position.
The One Shot Recording mode records images on the Timer Recorder corresponding to the alarm input, as shown below.
Notes:
• The thumbnails are based on an image each time an alarm is received.
• The recording number is automatically assigned to the image.
T
T
C1 C2 C3 C4 C2 C2 C2 C2 C1 C2 C3 C4 C4 C4 C4 C4
Alarm 2 in Alarm 4 in
Thumbnail
Pre-recording Post-recording
Thumbnail
Pre-recording Post-recording
T
T T
C1 C1 C1 C1 C2 C2 C2 C2 C3 C3 C3 C3
Alarm 1 in
Thumbnail
Alarm Image
Alarm 2 in
Thumbnail
Alarm Image
Alarm 3 in
Thumbnail
Alarm Image