Filter
Top Products
75
■ System Information
The table indicates the version of the hardware and soft-
ware.
1. Move the cursor to SYSTEM INFORMATION in the SYS-
TEM SETUP menu by pressing the C or D button, then
press the SET button.
The SYSTEM INFORMATION table appears on the mon-
itor screen.
Note: “VMD” will be displayed when the optional
motion detector board is installed in the disk
recorder.
2. To return to the previous SYSTEM SETUP menu, press
the SETUP/ESC button.
■ Error Report
There are 100 error records stored in chronological order in
10 pages of tables.
1. Move the cursor to ERROR REPORT in the SYSTEM
SETUP menu by pressing the C or D button, then
press the SET button.
The ERROR REPORT table appears on the monitor
screen as shown below.
2. Pressing the C or D button will move the cursor to up
or down and select the next or previous page of the
tables.
3. To clear the all records, press the + and - buttons
simultaneously for two seconds or more.
4. To return to the previous SYSTEM SETUP menu, press
the SETUP/ESC button.
9-4 ERROR REPORT
NO DATE TIME CAUSE
100 SEP12.99 23:59:59 THERMAL 6
099 SEP12.99 22:15:40 POWER RECOVER
098 SEP12.99 21:00:07 POWER LOSS
097 SEP12.99 17:33:05 ALTERED
096 SEP12.99 7:23:11 ERROR
095 SEP12.99 6:59:44 WARNING 1-5
094 SEP12.99 3:15:28 HDD EMPTY
093 SEP12.99 0:01:28 WARNING 1-5
092 SEP12.99 3:15:28 HDD EMPTY
091 SEP12.99 0:01:28 POWER LOSS
(TOTAL 100)
9-5 SYSTEM INFORMATION
HARDWARE VERSION MAIN 1.00
VMD 1.00
SOFTWARE VERSION MAIN 1.00
N/W 1.00