Filter
Top Products
99
DATA ERASE FUNCTION
The Disk Recorder can erase recorded data past due either
automatically or manually.
■ Auto Erase Function
1. Press the SETUP/ESC button for two seconds or more,
the WJ-HD500 SETUP menu as shown below appears
on the screen of the Multiscreen Monitor.
2. Select SYSTEM SETUP in the menu by pressing the D
or C button, then press the SET button.
The SYSTEM SETUP menu as shown below will appear
on the monitor screen
3. Select DISK MANAGEMENT in the menu by pressing
the D or C button, then press the SET button.
The DISK MANAGEMENT menu as shown below will
appear on the monitor screen.
WJ-HD500 SETUP *.**
TIMER OFF
REC SETUP
COMMON SETUP
*
MANUAL WITHOUT AUDIO
*
TIMER WITHOUT AUDIO
*
EMERGENCY WITHOUT AUDIO
MULTIPLEXER SETUP
ALARM SETUP
DISPLAY SETUP
COMMUNICATION SETUP
SYSTEM SETUP
DVD
9 SYSTEM SETUP
CLOCK JAN 1.00 0:00
TIME ADJUSTING OFF
SET TIME 0:00
AUTO KEY LOCK OFF
PASSWORD ALL
*****
OPERATION
*****
BUZZER ON
USER DEFINED SETUP
*LOAD
DISK MANAGEMENT
ERROR REPORT
SYSTEM INFORMATION
9-3 DISK MANAGEMENT
DISK INFORMATION
HDD FULL 1%
ERASE
4. Select ERASE in the menu by pressing the D or C but-
ton, then press the SET button.
The ERASE menu as shown below will appear on the
monitor screen.
5. Move the cursor to the AUTO ERASE parameter by
pressing the D or C button, then select the storage
days on the disk by pressing the + or - button.
OFF: Disables auto erase function.
1 – 180 DAYS: The auto erase function is activated
after the set number of days has passed.
The factory default setting is OFF.
6. Press the SETUP/ESC button for two seconds or more
to close the menu and return to the normal view.
• The recorded data will be automatically erased the
storage days set in step 5 are passed.
• The data erase is executed at midnight (0:00) on
the specified day.
If the Disk Recorder is powered off at that time, the
Disk recorder will execute erase by searching stor-
age data when the Disk Recorder is powered on.
9-3-2 ERASE
AUTO ERASE OFF
ERASE DATA BEFORE SEP12.00
ARE YOU SURE TO EXECUTE?
[SET]:EXECUTE YES NO