Panasonic DMR-E80H DVD Recorder User Manual


 
24
RQT6984
Timer recording
Timer recording
[HDD] [RAM] [DVD-R]
This is a simple way of specifying a time to stop recording when you
are in a hurry or before you go to bed.
During recording
Press [¥, REC] to select the recording time.
Each time you press the button:
0:30 "# 1:00 "# 1:30 "# 2:00 "# 3:00
^"" Counter (cancel) !" 4:00 ,""}
For your reference
Press [STATUS] to show the time remaining until recording finishes.
This does not work during timer recordings or while using Flexible
Recording (page 16).
Recording stops and the set time is cleared if you press [].
The set time is cleared if you change the recording mode or chan-
nel while recording is paused.
Preparation
Ensure the clock (and guide channels for VCR Plusr recording,
page 8) are set correctly.
Release protection (cartridge page 10, disc page 36) before
proceeding. [RAM]
Entering VCR Plusi codes is an easy way of programming the unit
for recording. You can find these codes in newspapers and maga-
zines. You can enter up to 32 programs up to a month in advance.
1 Press
[VCR Plusr].
2 Press the numbered buttons to enter
the VCR Plusr code.
Press [2] to move
back to correct a
digit.
3 Press [ENTER].
Confirm the program and make corrections if necessary using
[3, 4, 2, 1].
“Invalid Entry” is displayed when you enter the wrong code.
Reenter the code.
To select the recording drive
1 Press [2, 1] to select “DRIVE”.
2 Press [3, 4] to select “HDD” or “DVD”.
To change the recording mode
Press [REC MODE].
To enter the title of the program
Press [2, 1] to select “Enter Title” and press [ENTER]
(page 38).
Repeat steps 1–3 to program other recordings.
4 Press [RETURN].
The timer recording list disappears and the unit enters Timer
Recording standby mode (“
F” appears on the unit display).
The unit is not off. To save power, turn the unit off by press-
ing [Í, DVD POWER].
Specify a time to stop recording
DVD
TV
INPUT SELECT
VCR Plus+
OPEN/CLOSE
TV/VIDEO
CH
VOLUME
SKIP
DIRECT NAVIGATOR
PLAY LIST
TOP MENU
ENTER
MENU
FUNCTIONS
RETURN
STOP
PAU S E
PLAY/x1.3
SLOW/SEARCH
CANCEL
123
DVD TV
4
5
6
789
0
100
FRAME
CM SKIP TIME SLIP
ERASE
REC
PROG/CHECK
ADD/DLT
DUBBING
REC MODE
STATUS
MARKER
AUDIO
SETUP
DISPLAY
POSITION
MEMORY
POWER
3, 4, 2, 1
ENTER
Í, DVD POWER
VCR Plus+
PROG/CHECK
STATUS
RETURN
¥, REC
REC MODE
HDD DVD
Numbered
buttons
e.g.,
Using VCR Plusr codes to make timer
recordings
No.
VCR Plusi
3/26 TUE12:53 PM
Enter PLUS CODE Number by using 0–9 key.
1:42 SP
Remain HDD DVD
17:36 SP
3/26 TUE12:53 PM
VCR Plusi
1
2
1
2
12
1 2
1:42 SP
Remain HDD DVD
17:36 SP
TIMER
RECORDING
MODE DRIVE
CHECK
OFFONNo
CHANNEL
DATE
3/26 TUE 12:55 PM
01 SP Enable2:00 PM1:00 PM64 ABC 3/ 26 TUE
1:42 SP
Remain HDD DVD
17:36 SP
New Timer Program
5:10 PM4:20 PM4 / 1 MON
MODE
DRIVE
OFFON
CHANNEL
DATE