Filter
Top Products
40
RQT6984
Advanced operation
Using on-screen menus
1 Press [DISPLAY].
e.g., DVD-RAM
2 Press [3, 4] to select the menu and
press [1].
3 Press [3, 4] to select the item and
press [1].
4 Press [3, 4] to select the setting.
To clear the on-screen menus
Press [DISPLAY].
For your reference
≥Some items can be changed by pressing [ENTER].
≥Some items can also be changed with the numbered buttons.
≥The screens depend on the disc contents.
≥Depending on the condition of the unit (playing, stopped, etc.) and
disc contents, there are some items that you cannot select or
change.
Not available when playing CDs and MP3 discs.
e.g., DVD-RAM
[A] Soundtrack/Subtitle language
[B] Audio attributes
LPCM/PPCM/ÎDigital/DTS/MPEG: Signal type
k (kHz): Sampling frequency
b (bit): Number of bits
ch (channel): Number of channels
.1: Low frequency effect (not displayed if
there is no subwoofer signal)
0: No surround
1: Mono surround
2: Stereo surround (left/right)
1: Center
2: Front leftiFront right
3: Front leftiFront rightiCenter
For your reference
≥
When playing back recordings of SAP broadcasts, “1+1 ch” will be displayed.
≥You can only select subtitles, soundtracks, and angles if they are
recorded on the disc.
≥Some discs allow changes to soundtracks, subtitles, and angles
only by using the disc’s menus.
≥If the subtitles overlap closed captions recorded on discs, turn the
subtitles off.
Common procedures