Filter
Top Products
30
RQT6984
Editing
Creating play lists
[HDD] [RAM]
Specify start and end points to create scenes, then specify the order
in which they are to be played. These scenes are not recorded sep-
arately so this doesn’t use much capacity.
You can create a maximum of 99 play lists and 999 scenes on a
DVD-RAM and HDD.
Preparation
Release protection (cartridge ➜page 10, disc ➜page 36) before
proceeding.
1 While stopped
Press [PLAY LIST].
2 Press [3, 4] to select “–– ––/––” and
press [ENTER].
3 Press [ENTER] at the start point.
≥Use [6], [5] and slow-motion (➜page 20) to find the
start and end points.
≥Pressing [:], [9] allows you to select other programs.
4 Press [ENTER] at the end point.
To specify another scene
Select “Next” and press [ENTER], then repeat steps 3 and 4.
5 Press [3, 4] to select “Exit” and
press [ENTER].
The play list screen appears.
To clear the play list screen
Press [PLAY LIST].
To stop partway through
Press [RETURN].
For your reference
≥You cannot specify an end point before a start point.
≥You may not be able to specify points within 3 seconds of each
other.
≥Play pauses if the end of the last program on the disc is reached
during this procedure.
≥Depending on the state of recording, the actual number of play
lists that can be recorded may be less than that specified in this
manual.