Filter
Top Products
47
RQT8023
Transferring
(Dubbing)
Recording from a video cassette recorder
[HDD] [RAM] [-R] [-RW‹V›] [+R]
e.g., Connecting to the IN2 input terminals on the front
You can also connect to the IN1 or IN3 input terminals on
the rear.
≥Turn off the unit and other video equipment before connecting.
If the audio output of the other equipment is monaural
Connect to L/MONO on the IN2 input terminals at the front.
§
The S-VIDEO terminal achieves a more vivid picture than the
VIDEO terminal.
Preparation
≥Press [HDD] or [DVD] to select the recording drive.
[Note]
When recording using this unit’s input terminals, only the sound
received at the time of recording will be recorded.
As long as the secondary audio that is recorded on the video
cassette is not output on the unit in play, it is not recorded.
1 While stopped
Press [INPUT SELECT] to select the
input channel for the equipment you
have connected.
2 Press [REC MODE] to select the
recording mode.
3 Start play on the other equipment.
4 When you want to start recording
Press [¥ REC].
Recording starts.
To skip unwanted parts
Press [;] to pause recording. (Press again to restart recording.)
To stop recording
Press [∫].
≥Using Flexible Recording (➡ 22), you can save the content of a
video cassette (approx. 1–8 hours) to a 4.7 GB disc with the best
possible quality of recording without wasting disc space.