Filter
Top Products
49
RQT8023
Transferring
(Dubbing)
∫ To edit the transferring (dubbing) list
Select the item in step 5–3 (for a still picture) or 5–5
(for a folder) (➡ 48, right column)
1 Press [SUB MENU].
2 Press [3, 4] to select the operation and press
[ENTER].
Erase All:
Erase all items registered on the transferring (dubbing) list.
Press [2, 1] to select “Yes” and press [ENTER].
Add:
Add new items to the transferring (dubbing) list.
Press [3, 4, 2, 1] to select the still picture or folder to be added
and press [ENTER].
Erase:
Erase the selected items.
Press [2, 1] to select “Yes” and press [ENTER].
You can also erase multiple items (➡ above, Multiple editing).
To cancel all registered transferring (dubbing) settings and lists
After performing steps 1–2 (➡ 48, left column)
1 Press [3, 4] to select “Cancel All” and press [ENTER].
2 Press [2, 1] to select “Yes” and press [ENTER].
≥The settings and lists may be cancelled in the following situations.
–When a title or still picture has been recorded or erased at the
transfer (dubbing) source
–When steps have been taken, for instance, to turn off the unit,
remove the card, open the tray, change the transfer (dubbing)
direction, etc.
∫ To select another folder
(➡ 9, Structure of folders displayed by this unit)
1 Press [3, 4, 2, 1] to select “Folder” and press [ENTER].
If you want to switch to another higher folder (➡ below)
2 Press [3, 4] to select the folder and press [ENTER].
You can also select folders with the numbered buttons.
e.g., 5: [0] ➡ [0] ➡ [5]
15: [0] ➡ [1] ➡ [5]
115: [1] ➡ [1] ➡ [5]
≥The still pictures of different folders cannot be registered on the
same list.
To switch to another higher folder
≥Only when selecting the source folder
If there is a multiple number of higher folders recognizable,
While the screen on the right appears
1 Press [SUB MENU].
2Press [3, 4] to select “Select
Folder” and press [ENTER].
3Press [2, 1] to select the
higher folder and press
[ENTER].
4Press [3, 4] to select the
desired folder and press
[ENTER].
[SD]
>
[HDD]
or
[RAM]
Preparation
Press [SD] to select the source drive.
1 While stopped
Press [FUNCTIONS].
2 Press [3, 4] to select “Other
Functions” and press [ENTER].
3 Press [3, 4] to select “COPY ALL
PICTURES” and press [ENTER].
≥If there is a multiple number of higher folders recognizable,
you can switch them using [2, 1].
4 Press [3, 4] to select “Copy to” and
press [2, 1] to select the drive.
5 Press [3, 4, 2, 1] to select “Copy”
and press [ENTER].
To stop transferring (dubbing)
Press and hold [RETURN] for 3 seconds.
To return to the previous screen
Press [RETURN].
To show other pages
Press [3, 4, 2, 1] to select “Previous” or “Next” and press
[ENTER].
≥You can also press [:, 9] to show other pages.
Multiple editing
Select with [3, 4, 2, 1] and press [;]. (Repeat.)
Press [ENTER] to register to the list.
≥A check mark appears. Press [;] again to cancel.
Add
Erase
Erase All
Create List Select pictures
SD CARD
0001
Folder 103__DVD
0002 0003 0004
001 100__DVD
002 101__DVD
003 102__DVD
---
\DCIM\100__DVD
004 103__DVD
001 100__DVD
002 101__DVD
003 102__DVD
---
\DCIM\100__DVD
004 103__DVD
Select folder to access.
Press ENTER to confirm.
Select Folder
\DCIM
Transferring (dubbing) all the still
pictures on a card—COPY ALL
PICTURES
[Note]
≥When transferring (dubbing) the still pictures on a folder by
folder basis (➡ 48) or card by card basis (➡ above, COPY ALL
PICTURES), files other than the still picture files inside the
folder will also be transferred (dubbed). (This does not apply to
the lower folders contained inside the folders.)
≥If still pictures are already contained inside the transfer
(dubbing) destination folder, the new still pictures are recorded
following the existing still pictures.
≥If the space on the destination drive runs out or the number of
files/folders to be transferred (dubbed) exceeds the maximum
(➡ 35), transferring (dubbing) will stop partway through.
≥When a name has not been input for the transfer (dubbing)
source folder, it is possible that this folder’s name will not be the
same on the transfer (dubbing) destination. It is recommended
that you input a folder name before transferring (dubbing)
(➡ 42).
≥Print number setting (DPOF) is not transferred (dubbed).
≥The sequence in which the still pictures are registered on the
transfer (dubbing) list may not be the same at the transfer
(dubbing) destination.
Copy All Pictures (JPEG)
Copy from
SD card
\DCIM
Copy to
HDD
\JPEG\DCIM001
Copy all pictures (JPEG) in the card
EH50English.book Page 49 Tuesday, February 1, 2005 6:36 PM