Filter
Top Products
RQT8009
12
Getting started
STEP 3 Channel settings
Set these guide channels so you can use the VCR Plus+ system for
scheduled recording. Before starting the settings, prepare a chart
showing the channels, station names, and guide channels.
•If you have connected a cable TV box or satellite receiver, the
VCR Plus+ system does not work so you do not have to set the
guide channels.
1 Press [SETUP].
2 Press [e, r] to select “Channel” and
press [q].
3 Press [e, r] to select “VCR Plus+ Ch.
Setting” and press [ENTER].
e.g., “Signal Source (RF IN)” is set to “CableTV”.
4 Press [e, r] to select the guide
channel you want to set and press
[q].
When selecting the guide channel, press and hold [e, r] to
scroll up and down the screen.
5 Press [e, r] to select the channel
corresponding to the guide channel
and press [w].
To delete a number, press [ CANCEL].
Repeat steps 4 and 5 to enter other channels.
6 Press [ENTER].
To exit the screen
Press [SETUP].
To return to the previous screen
Press [RETURN].
VCR Plus+ guide channel settings
TV
ADD/DLT
OPEN/CLOSE
SKIP SLOW/SEARCH
REC MODE ERASE
REC
POWER
F Rec
TIME SLIP
FUNCTIONSDIRECT NAVIGATOR
TOP MENU
RETURN
VOLUME
CH
INPUT SELECT
STATUS
DISPLAY
SUB MENU
DVD POWER
TV/VIDEO
SETUP
CREATE
CHAPTER
SCHEDULE
CM SKIP