RQT8009
27
Editing
Multiple editing is possible.
Multiple editing is possible.
Title operations
Erase Title
Press [w, q] to select “Erase” and press [ENTER].
•
Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
•The available recording space on DVD-R or +R does not increase when you erase titles.
•Available recording space on a DVD-RW (DVD-Video format) increases only when the last recorded title is
erased. It does not increase if other titles are erased.
Properties
Information (e.g., time and date) is shown.
•Press [ENTER] to exit the screen.
Title Name
You can give names to recorded titles.
➔ page 31, Entering text
Setup Protection
Cancel Protection
If set, this will protect the title from accidental erasure.
Press [w, q] to select “Yes” and press [ENTER].
The lock symbol appears when the title is protected.
Shorten Title
(➔ below, “For quicker
editing”)
You can remove unnecessary parts of the recording such as commercials.
Press [ENTER] at the start point and end point of the
section you want to erase.
Press [e, r] to select “Exit” and press [ENTER].
•
Select “Next” and press [ENTER] to erase other sections.
Press [w, q] to select “Erase” and press [ENTER].
Change Thumbnail
(➔ below, “For quicker
editing”)
You can change the image to be shown as a thumbnail picture in the Title
View.
Press [q] (PLAY) to start play.
Press [ENTER] when the image you want to use as a
thumbnail is shown.
To change the thumbnail
Restart play and press [e, r] to select “Change”, then press [ENTER] at
the point you want to use as the thumbnail.
Press [e, r] to select “Exit” and press [ENTER].
Divide Title
(➔ below, “For quicker
editing”)
You can divide a title into two.
Press [ENTER] at the point you want to divide the title.
Press [e, r] to select “Exit” and press [ENTER].
Press [w, q] to select “Divide” and press [ENTER].
To confirm the division point
Press [e, r] to select “Preview” and press [ENTER]. (The unit plays 10
seconds before and after the division point.)
To change the division point
Restart play and press [e, r] to select “Divide”, then press [ENTER] at the point you want to change.
Note
•The divided titles retain the name and CPRM property (➔ page 36) of the original title.
•Video and audio just before and after the dividing point may momentarily cut out.
RAM
-R
-RW(V) +R
RAM
-R -RW(V) +R
-RW(VR)
Properties
No.
Ch.
Date
01
4
6/20/2002 Wed
Start
Rec. time
10:00 AM
2:15 (SP)
Dinosaur
ENTER
RAM
-R -RW(V) +R
RAM
DVD-RAM
DIRECT NAVIGATOR Title
10 10/27 Mon
07 08
8 10/27 M
RAM
DVD-RAM
DIRECT NAVIGATOR Partial Erase
Start
Next
Exit
0:43.21
Play
08
End
- -:- -.- - - -:- -.- -
Start End
ENTER
1
2
3
RAM
-R -RW(V) +R
DVD-RAM
DIRECT NAVIGATOR Change Thumbnail
Change
Exit
0:00.01
00:00.01
Change
Start play and select
the thumbnail position.
08
ENTER
1
2
3
RAM
DVD-RAM
DIRECT NAVIGATOR Divide Title
0:00.11
--:--.--
Divide
08
Divide
Exit
Play
Preview
ENTER
1
2
3
Chapter operations
Erase Chapter
Press [w, q] to select “Erase” and press [ENTER].
•
Once erased, the recorded contents are lost and cannot be restored. Make certain before proceeding.
Create Chapter
(➔ below, “For quicker
editing”)
Press [ENTER] at the point you want to divide.
•
Repeat this step to divide at other points.
Press [e, r] to select “Exit” and press [ENTER].
Combine Chapters
Press [w, q] to select “Combine” and press [ENTER].
•
The selected chapter and following chapter are combined.
RAM
RAM
DVD-RAM
DIRECT NAVIGATOR Create Chapter
Create
Exit
0:43.21
PLAY
08
ENTER
1
2
RAM
For quicker editing
•Use search, Time Slip or slow-motion (➔ page 21) to find the desired point.
•Press [u, i] to skip to the end of a title.
DMR-ES10-P_new.fm Page 27 Saturday, February 12, 2005 2:31 PM
