Filter
Top Products
Y
PB
PR
OPTICAL
COMPONENT
VIDEO OUT
(PROGRESSIVE/
INTERLACE)
DIGITAL AUDIO OUT
(PCM/BITSTREAM)
S VIDEO OUT
S VIDEO
AV4 IN
AV4 IN
OUT
AUDIO
R
R
L L
VIDEO
AC IN
AV1 (TV)
AV2 (EXT)
RF OUT
RF IN
Connecting with a 21-pin Scart cable
1
Aerial
RF IN
Aerial input
RF OUT
Aerial output
AC mains lead
AV1 21-pin Scart socket
RF cable /
Aerial cable
erialA
input
AC mains lead
21-pin Scart cable
RF cable /
Aerial cable
Necessary for TV with Q-Link
4
4
TV
AV
1
3
2
DVD Recorder
AC IN~
Note For all connections additional cables and equipment shown are not supplied.:
If your television supports Q Link or RGB, connect it to the DVD Recorder with a fully
wired 21-pin Scart cable.
SETUP - Connection - [AV1 Output]
46
If your television supports Q Link follow the steps for Auto-Setup with Q Link on page 11
If your television doesn't support Q Link follow the steps for Auto-Setup without Q Link
on page 11
.
.
Follow the steps below.
Disconnect AC mains from all units.
1 Connect the aerial to the RF IN (Aerial input) of the DVD Recorder.
2 Connect the RF OUT (Aerial output) of the DVD Recorder to the Aerial input
of the television set.
3 Connect the AV1 socket (21-pin Scart socket) of the DVD Recorder to the
Scart input of the television set.
4 Connect the DVD Recorder and the television set to the AC mains socket.
10