Filter
Top Products
Before requesting service
î You can manually change the start and end time of TIMER
programmes in the TIMER RECORDING menu.
Is it possible to programme
a recording, with a start and
end time that are different
from the TV Guide system?
How can I cancel a TIMER
programming?
î The "T" symbol appears in the TV Guide when a TIMER recording is
programmed with the TV Guide system. To cancel a TIMER
RECORDING programming, press PROG/CHECK.
Select the desired entry and press CANCEL.
29
29
Cannot record.
TIMER-controlled recording is not
working.
Part or all recorded programmes
were lost.
The TIMER-controlled recording
cannot be cancelled.
RECORDING
î Check whether the inserted disc is suitable for recording.
î The disc is not formatted. Format the disc (RAM/DVD-RW).
î The write-protection device on the Cartridge is set to "PROTECT".
Deactivate the write protection.
î If you activated the write protection, deactivate it in the DISC
MANAGEMENT menu.
î The material that you want to record is copy-protected.
î The TIMER programming is incorrect or different TIMER-programmes
are overlapping each other. Correct the programming.
î The unit is in standby mode for TIMER-controlled recording.
Press TIMER.
î Check the clock setting.
î If the power goes out during recording or editing or the power plug is
disconnected from the power socket, the programme can be lost or the
disc can be damaged.
î Press TIMER during the TIMER-controlled recording.
î In the case of a TIMER-controlled recording via an external device,
press EXT LINK. EXT L disappears.
49
49
29
32
TV Guide
20
55
EXTERNAL INPUT
17
î The external device is not connected correctly.
î The correct external input channel AV2 or AV3 was not selected.
Video or audio from
external device is
not recorded.
EXTERNAL INPUT
PLAYBACK
44
44
7
53
DVD-Video will not play.
A title or chapter is not played back
after being selected.
Alternative soundtracks and subtitles
cannot be selected.
No subtitles.
The perspective cannot be changed.
You forgot your classification password.
î The disc is dirty or badly scratched.
î You inserted a disc that is not suitable for playback.
î You inserted a blank disc.
î Some DVD-Videos cannot be played if the security level has been changed.
î Some titles and chapter of DVD-Video are not played back if the
Ratings have changed.
î The languages were not recorded on the disc.
î You may need to use the disc menu to select the languages.
î The language is not recorded on the disc.
î The subtitles are not recorded on the disc or are not switched on.
î The angle perspective can only be changed for scenes that were
recorded in different angles.
î With the unit disc tray open, press and hold REC and PLAY/ x1.3
simultaneously for at least 5 seconds.
Playback does not
start.
No reaction when the button is pressed.
î appears on the screen. The procedure is stopped by the unit or the disc.
î The child lock feature has been activated.
The soundtrack/subtitle language does
not match the language selected in the
SETUP menu.
Black screen is played.
î You may have recorded MHEG Data or encrypted programms.