Filter
Top Products
Tuning
Disc
Picture
Sound
Display
Connection
SETUP
Others
SELECT
RETURN
TAB
7
Remote Control
Clock
Owner ID
Change the code of the remote control so that you can also use another it at the
same time.
Panasonic DVD un
[DVD 1] [DVD 2] [DVD 3]
Quick Start
Shipping Condition
Default Settings
All settings except for the security levels with associated password and the time settings are reset to their factory settings.
All settings except for the programmed channels, time, country, language and disc-language settings, the security
levels including password and the remote-control code are reset to the factory settings.
ENTER ENTER
Others Setting Option
[On] [Off]
On: The device is ready for use from standby mode after approx. 2 seconds. Standby mode uses more power.
Off: If you select Quick Start [Off], the programme information for TV Guide need to be reloaded after Power ON.
On
DVD 1
Clock
Quick Start
Owner ID
Shipping Condition
Remote Control
Default Settings
47
System Update
System Update
48
18
Load new software to your unit or update the programme guide during the night.
Secure the unit with your own PIN number and your own personal information.
Set the date and time.
Clock
OffAutomatic
0 00 00
1 1
2005
: : . .
Time Date
CHANGE
ENTER
RETURN
Please set the clock.
ENTER: access RETURN: leave
ENTER ENTER
Others Onwer ID Option
Owner ID
!
Use and press the Numeric buttons or to enter a four-digit PIN number.
!
Press to correct the digit.
!
Press the ENTER button twice to confirm.
!
Enter the [Name], [House No] and [Postcode] in the same way, using .
!
Press the ENTER button to confirm each entry.
!
Press the RETURN button to leave the Owner ID screen.
To display the Owner ID information on TV
!
On the unit press STOP for more than 5 seconds.
!
Use to switch automatic mode to [Off] and confirm with ENTER.
!
Use and to change Time and Date.
!
Confirm the change with ENTER.
ENTER ENTER
Others Clock Option
The PIN number is not displayed.
After 30 seconds this menu automatically disappears.
The clock will normally be set correctly during Auto-Setup however, in some circumstances
the DVD Recorder cannot set the clock automatically. In this case follow the operation steps
below to manually set the clock.
To activate the automatic time correction function
The correct time for the clock can be automatically maintained when the DVD Recorder is
tuned to a station that transmits a time signal.
!
Use to switch automatic mode to [On] and confirm with ENTER.
The automatic setting of the clock begins.
!
Under adverse reception conditions, etc., the Automatic time correction function may not
work. In this case the indication for Clock setting is automatically reset to MANUAL.
If the reception conditions improve later on, it is possible to activate this function.
Clock setting
If Clock setting is set to AUTO, do not
set it to MANUAL, otherwise the
automatic time correction function is
deactivated.
This DVD Recorder uses a 24 hour
clock. In case of a power failure an
automatic back-up system maintains
the clock for approximate 60 minutes.
When Clock setting is set to AUTO,
the automatic time correction function
checks and if necessary adjusts the
time several times every day.
The automatic time correction function
only works when the DVD Recorder is
in standby, it does not work in the
timer recording mode.Don't forget to
change summer time and winter time.
Owner ID
RETURN
Name
House No.
Postcode
PIN number
* * * *
RETURN : leave
* * * * * * * * * * * * * *
* * * * * * * * * * *
* * * * * * * * * * *
47
FUNCTIONS Selection Menu
SETUP
To Others
F
U
N
C
T
I
O
N
S
47
[EPG Download in Standby], [Software Update in
Standby], [Software Update Search Now]
DVB only