Filter
Top Products
29
Basic Operation
Projection display operation
Aspect types
(P. 30)
Receivable
broadcast types
(P. 35)
Channel
Channel caption
(P. 52)
TV status display
Using the number keys
Example 1: To select channel 125, first press the 1 key, then 2, then 5.
When selecting CABLE channels 100 to 125 with the number keys, first press the 1 key,
and then enter the remaining two digits.
Press the RECALL button, except when the MENU screen is displayed, to display current
TV status information.
Example 2: To select channel 12, press the 1 key, then 2. Channel 12 appears momentarily.
Example 3: To select channel 8, press the 8 key. Channel 8 appears momentarily.
Invalid operation notice feature
If an invalid operation is attempted, the mark shown right is
displayed.
Projection display Channel up/down
buttons can also be used to select an
outside input as shown right.
* No input mode is displayed for terminals with
no equipment connected.
*
*
*
*
*
Using projection display Channel up/down buttons to select input mode
Auto shut off
To extend lamp life, if there is no signal to the set’s tuner for 5 minutes, the lamp will shut off automatically.