Filter
Top Products
55
Advanced Operation
Automatically changing screen size
1
2
Press the ACTION button to display the MENU screen and select SET UP.
ON : When screen size specification
signals are detected, screen
size is automatically changed.
OFF : The screen size is not auto-
matically changed. (Turn OFF
if this function does not oper-
ate properly.)
If the received signal contains screen size specifications in RF, VIDEO INPUT (1–3) or
COMPONENT VIDEO INPUT (1–2), the screen size is automatically changed.
Press to select
VIDEO.
Press to display
the VIDEO screen.
Press to set
“ON” or “OFF”.
Press to select
ID-1.
Press to exit menu.
3
Notes:
• When ID-1 is detected and screen size is changed, Aspect mode will be displayed.
• When displaying split screen, ID-1 is not detected.
Setting when 480p signals (sequential scan) are input through COMPONENT VIDEO INPUT
Adjust 480p signals to achieve a natural color from digital equipment connected to
COMPONENT VIDEO INPUT (Y, PB / Cb ,PR / Cr input terminals).
1
2
Press the ACTION button to display the MENU screen and select SET UP.
SDTV : When the input signal is a normal
TV system (NTSC).
HDTV :When the input signal is a High-
Definition system (HD).
Press to select
VIDEO.
Press to display
the VIDEO screen.
Press to select
480P COLOR
MATRIX.
Note:
480p COLOR MATRIX does not need to be set when using Hi-Definition equipment or
480i output equipment.
Press to set “SDTV”
or “HDTV”.
Press to exit menu.
3