40
Photo Viewer
miniSD Card requires miniSD adapter.
• This function is not compatible with card type hard disk
(Micro Drive, Mobile type hard disk, etc).
• Memory cards are not supplied with this television.
Card Data Protection
• Do not remove the card while the unit is accessing the
information. Such action may damage the memory card
or the unit itself.
• Before inserting or removing the PC card, make sure that
the TV is turned Off. Otherwise, it may damage the unit.
• Do not touch the terminals on the back of the SD card/PC
card.
• Always insert a card in the correct direction. Failure to
do so may result in damage to the card and this unit.
• Do not subject the card to excessive pressure or strong
impacts.
• Electrical interference, electrostatic discharges and
malfunctions of the unit or card may all result in data loss
or damage to the card.
• Stored data should be periodically backed up as a
protection against data corruption, data loss or device
malfunction. Please note that our company shall not
accept any liability for damage or loss of stored data.
Compatible card type and card size
PC card slot
•
SD Card (1GB)
•
miniSD Card (128MB)
•
Compact Flash (1GB)
•
Smart Media (128MB)
•
Memory Stick (128MB)
•
xD Picture Card (128MB)
•
Flash ATA (128 MB)
•
Memory Stick Pro (1GB)
The cards require standard PC card adapter.
(Some PC card adapter will not be compatible.)
SD card slot
•
SD Card (1GB)
•
miniSD Card (128MB)
JPEG thumbnail
If “Is memory card in?” appears, check if a card is inserted.
If not, turn the unit power off, correctly insert a card, then
turn the unit back on. Now, place unit into JPEG Viewer
mode.
Card Warning Messages
If there is a problem with the card or card data, the following
messages will appear.
Is memory card in?
No file.
A card may not be inserted, or
the card format may not be
supported. (Use SD cards
formatted in a digital camera.)
The card may not contain image
data, or all images on the card
may be incompatible.
Message description
Total number of JPEG images on the inserted card is
displayed.
Selected picture information is displayed.
No. : Image number or file name is displayed.
Date : Date of recording is displayed.
Pixel : Display resolution is displayed.
Note:
Depending on the JPEG type, Info contents may not be
displayed correctly.
Notes:
• Only JPEG files can be displayed.
• Up to 9,999 JPEG files can be displayed.
• If images have duplicate numbers, none of the images
will be displayed.
• Depending on the JPEG type, it may not be displayed
normally.
Navigation Area
Operational buttons are displayed as “GUI”
(Graphical User Interface).
“Accessing” is displayed while data is read.
Index Area
JPEG images contained on the inserted card are
displayed for viewing.
JPEG thumbnail
Accessing
Info
Total 8
No. 102-0001
Date 01/01/2000
Pixel 2048x1536
102-0001 102-0002 102-0003
102-0004 102-0005 102-0006
102-0007 102-0008
Select
Select
OK
MENU
RETURN
Afterimage prevention function
If still image data is displayed for more than a few
minutes, the afterimage prevention function will
activate and the image disappears.