Panasonic TH-50PX500U Flat Panel Television User Manual


 
99
ANTENNA
Cable In
DIGITAL
AUDIO OUT
G-LINK
CableCARD
TM
AN
TENNA
Cable In
POD MODULE
INSERT THIS END
The RF input mode must be set to Antenna
(see pages 19, 30).
Note:
Cables and connectors are not supplied with this set.
Mixer
UHFVHF
Back of the TV
75 Ohm Coaxial Cable (5C-2V or higher specification)
Antenna
Terminal
F-Type Antenna
Connector
or
Incoming
Cable signal
Home antenna
CableCARD
TM
allows you to tune digital and high definition cable channels through the cable antenna.
Consult your cable company on the availability of CableCARD
TM
.
Notes:
• If you experience keyboard or remote control function hang-up when using CableCARD
TM
, unplug the TV and plug it
back on and try the controls again. If this condition persists, please call Panasonic Customer Call Center for further
instructions.
• Do not insert a PCMCIA card into CableCARD
TM
slot.
Back of the TV
Upper side of the card
1.Connect the cable antenna to ANT connector.
2.Turn the TV on (see page 15).
3.Set the input mode to TV (see page 16).
4.Insert the CableCARD
TM
(with upper side facing you) into CableCARD
TM
slot on the back of the TV.
Follow the messages displayed on the screen.
Connection
Procedure
Antenna Connection
CableCARD
TM
Connection