Filter
Top Products
6
The front of the display panel has been specially
treated. Wipe the panel surface gently using only a
cleaning cloth or a soft, lint-free cloth.
•
If the surface is particularly dirty, soak a soft, lint-free
cloth in a weak detergent solution and then wring the
cloth to remove excess liquid. Use this cloth to wipe the
surface of the display panel, then wipe it evenly with a
dry cloth, of the same type, until the surface is dry.
• Do not scratch or hit the surface of the panel with
fingernails or other hard objects. Furthermore, avoid
contact with volatile substances such as insect sprays,
solvents and thinner; otherwise, the quality of the
surface may be adversely affected.
Check that you have the Accessories and items shown
Operating
Instruction
Remote control
EUR7627Z50 or
EUR7627Z80
Batteries for the
remote control
(AA Battery × 2)
Pedestal
TY-ST42PX500
(TH-42PX500U)
TY-ST50PX500
(TH-50PX500U)
Product Registration
Card (for U.S.A.)
Customer Care Plan
Card (for U.S.A.)
• Wall-hanging bracket
(Angled)
TY-WK42PR2U
• Wall-hanging bracket
(vertical)
TY-WK42PV3U
Cable clamper
× 2
F-Type
antenna
adapter
(for 5C-2V)
( × 1)
AC cord
IR Blaster
( × 1)
TNQX016
Accessories
Optional Accessories
Cleaning and maintenance
If the cabinet becomes dirty, wipe it with a soft, dry
cloth.
• If the cabinet is particularly dirty, soak the cloth in a
weak detergent solution and then wring the cloth dry.
Use this cloth to wipe the cabinet, and then wipe it dry
with a dry cloth.
• Do not allow any detergent to come into direct contact
with the surface of the Plasma TV.
If water droplets get inside the unit, operating problems
may result.
• Avoid contact with volatile substances such as insect
sprays, solvents and thinner; otherwise, the quality of
the cabinet surface may be adversely affected or the
coating may peel off. Furthermore, do not leave it for
long periods in contact with articles made from rubber
or PVC.
Ferrite core
Large size × 1
ZCAT3035-1330
Small size
Gray color × 1
ZCAT2235-1030
White color × 4
RFC-8
Pull back the
tabs (in two
places) to
open.
Put the cable
and close.
Attaching the ferrite core
Be sure to choose the appropriate size of ferrite core
(large or small) and the correct setting of the cable
(winding), as indicated by each connection diagram on
the following pages (12, 14).
1
2
TV
1 2 3
4 5 6
7 8
0
9
CH
VOL
CH
VOL
OK
+
-
• Floor stand
TY-S42PX500W
(TH-42PX500U)
TY-S50PX500W
(TH-50PX500U)