Filter
Top Products
10 C2900M-B (1/03)
THE BROWSER
If you plan to use a web browser to view live video across the network, there are procedures to
complete before you can use the browser. If you installed Internet Explorer 5.5 from the CD that
came with the PelcoNet NET104A Transmission System, you can skip the following. Otherwise,
complete the following before trying to use the browser.
1. Internet Explorer 5.5 or higher must be installed before continuing.
2. Set the computer’s display settings to use 16- or 32-bit color. (This is required for the live video
feature to function properly.)
3. Click the Start menu in Windows
®
.
4. Click Run.
5. In the open box, type D:/PACTIVEX.EXE (where D:/ = your CD ROM drive letter).
6. Click OK.
7. Follow the on-screen setup instructions to finish installing the plug-in.
MINIMUM REQUIREMENTS
• PC with Windows 95/98/NT/2000/XP
• Gateway to the network
• Microsoft
®
Internet Explorer 5.5 or free serial interface and terminal program or PelcoNet
receiver and video monitor
• Screen resolution of 800 x 600 pixels or higher, 16- or 32-bit pixel color resolution