Filter
Top Products
102 C2900M-B (1/03)
CONNECTING PELCONET TO A CM6800 AND KBD200A FOR REMOTE
ASCII CONTROL
Refer to Figure 52A and Figure 52B. This configuration lets an operator view and control cameras
with a remote KBD200A keyboard. All settings are done in the CM6800 manager program or
through a CM6800 menu. Note the following:
• Port 2 defaults to ASCII and RS-232.
• Ports 7 and 8 can be set to ASCII and RS-232 by using the CM6800 manager program (refer to
Figure 50) or by using a CM6800 menu (refer to Figure 51).
Pelco recommends using Port 2.