Filter
Top Products
C2900M-B (1/03) 107
15. How do I program PelcoNet with HyperTerminal?
Using a null modem cable, connect a COM port on your PC to the COM port on NET104A. Open
HyperTerminal and set the port to use to 19200, 8, N, 1, and No Flow Control. Type ?, and
follow the help menu.
16. How much bandwidth does PelcoNet use?
PelcoNet’s bandwidth is adjustable. You can set it from 10 Kbps up to 1 Mbps. Pelco
recommends a minimum of 250 Kbps for live video at medium image quality. Check with your
network administrator for how much bandwidth to use.
17. Can I use PelcoNet with a DSL or cable connection?
Yes. You will need a static IP address from your provider. Also verify what kind of bandwidth
you will get since it varies by location. Verify that your provider is not filtering the TCP/IP ports
that PelcoNet uses.