Pelco DX7000 Series DVR User Manual


 
10 C665M-C (5/03)
COLOR SETUP
If required, use this screen to adjust the contrast, brightness, and color level settings of a scene.
Figure 3. Color Setup Menu
1 CAMERA Selection Box – Use the drop down menu to the right of the camera selection box to select a camera.
2 CON (Contrast) Slider Bar – Drag the cursor on the CON bar to change the contrast value of the viewed and recorded
scene. Proper adjustment will allow maximum gradations between the darkest and lightest parts of a scene.
3 BRI (Brightness) Slider Bar – Drag the cursor on the BRI bar to change the brightness value of the viewed and recorded
scene. Adjust the brightness of the scene to compensate for differences in lighting.
1
2
3
4
5
6
8
7