Pelco DX7000 Series DVR User Manual


 
C665M-C (5/03) 29
PRESET TOURS
A preset tour is a programmed sequential execution of preset positions.
HOW TO PROGRAM A PRESET TOUR
a. Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.
b. Click PRESET.
c. Select a camera by moving the cursor to the desired camera view and clicking the left mouse button.
d. Click the TOUR button to turn it ON.
e. Click the SET button to turn it ON.
f. Click preset buttons in any sequential order to program a tour.
g. To stop programming the preset tour, click the SET button and then the TOUR button.
HOW TO RUN A PRESET TOUR
a. Click the PTZ button in the DISPLAY Mode. The PTZ Mode appears.
b. Click PRESET.
c. Click TOUR.
d. Click MOVE. The preset tour starts.
e. To stop the tour click the MOVE and TOUR buttons.
HOW TO CLEAR A PRESET TOUR
a. Click TOUR.
b. Click CLEAR. The preset tour is now cleared. A preset tour must be cleared before a new preset tour can be programmed.