Pelco DX7000 Series DVR User Manual


 
C665M-C (5/03) 41
6 RELAY OUTPUT Buttons – Turn relays connected to DX7000 DVR ON/OFF.
7 DOMAIN/IP ADDRESS Text Box – Displays address of domain site.
8 SITE NAME Text Box – Displays name of domain site.
9 Screen Division Buttons
Single camera display
Displays cameras 1-9
Not available in non-overlay mode
Quad display, cameras 1-4
Displays cameras 10-16
Not available in non-overlay mode
Quad display, cameras 5-8
Displays all 16 cameras
Not available in non-overlay mode
Quad display, cameras 9-12 Sequencing mode – Sequence using a single-, four-, or
Not available in non-overlay mode nine-camera display.
Quad display, cameras 13-16 Full-screen display – Removes menu bars from display. Click
Not available in non-overlay mode the right mouse button to return to previous screen display.
NOTE: You can also use the left and right mouse buttons to change the screen division.
Single Camera Display Using the Mouse – Move the cursor to a camera view, and click the left mouse button. A green rectangle
appears around the selected view. Click the left mouse button again to display a single camera view of the selected camera. To
return to the previous screen display, click of the left mouse button again.
Full-Screen Display Using the Mouse – Click the right mouse button anywhere on a camera scene to remove the menu bars from
the display. Click the right mouse button again to return to the previous screen display.
* Settings are not available with DX7008 models.
*
*
*
*